Storage
•
You can hook the � oor nozzle into the bracket on the back of the device for convenient
storage and push the telescoping tube together as far as possible.
•
Store the vacuum cleaner in a dry, cool indoor room that is not accessible for children and
animals.
Troubleshooting
If your device no longer functions properly, exhibits damage or requires a spare part, please
contact our customer service centre. For your own safety, do not perform any repairs yourself.
The following table gives you tips on how to resolve minor problems yourself.
Problem
The vacuum cleaner
has no suction power.
The suction power is
weak.
The device emits dust
when vacuuming.
The power cord cannot
be wound up com-
pletely.
An unpleasant odour
develops when vacu-
uming.
Potential cause/solution/tips
•
Is the mains plug not correctly connected with the socket?
Correct the position of the mains plug.
•
Is the socket defective? Try another socket.
•
Check the fuse for your mains connection.
•
Are the � lters plugged? Clean the dust and exhaust � lter.
•
Is the auxiliary air valve on the handle open? Close it.
•
Is the dust bin too full? Empty the bin.
•
Are the � lters very dirty? Clean them.
•
Is the nozzle, telescoping tube or suction hose plugged?
Turn the device off , pull the mains plug out of the socket and
remove the obstruction (also see chapter "Assembly").
•
Has the dust bin not been closed properly and/or is it not
(properly) inserted in the device? Correct this.
•
The cord has not been properly wound up in the device. Pull
it out somewhat and then push the button for engaging the
cord winder again.
•
Are you using the device for the � rst time? An odour often
develops when using new devices for the � rst time. The odour
should disappear once you have used the device a few times.
GB
55