Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Never use solvents or aggressive detergents in order to clean the device! Rather use a soft and damp cloth.
Please use the original packaging if the device is to be transported.
Please consider that unauthorized modifications on the device are forbidden due to safety reasons!
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock, etc.
INSTALLATION
Installing/Replacing the lamp
Before replacing the lamp, unplug mains lead and let the lamp cool down (approx. 5 minutes).
During the installation do not touch the glass-bulbs bare-handed! Please follow the lamp manufacturer's
notes!
Do not install lamps with a higher wattage! Lamps with a higher wattage generate temperatures the device
was not designed for. Damages caused by non-observance are not subject to warranty.
For the installation, you need one 12V/7W G-4 lamp.
Procedure:
Step 1: Carfully unscrew the ball/cylinder housing.
Step 2: If replacing the lamp, remove the old lamp from the lamp-socket.
Step 3: Put the new 12V/7W G-4 lamp into the lamp-socket.
Step 4: Replace the ball/cylinder housing.
OPERATION
Install the device on a plane surface.
Connect the connection cable of the power-unit with the AC IN-socket. Plug the power unit into your outlet.
With the POWER-switch, you can switch the device on and off.
DANGER TO LIFE!
Only install the lamp with the device switched off!
Unplug from mains before!
CAUTION!
The lamp has to be replaced when it is damaged
or deformed due to the heat!
Do not operate this device with opened ball/cylinder housing!
10/19
00029333.DOC, Version 1.1
Publicidad
Tabla de contenido
