PROBLEM
Tines will not rotate
Motor fails to start when switch
trigger is depressed
The tines stop rotating
This product has a Three-year Limited Warranty for personal,
family, or household use (30 days for business or commercial use).
For warranty details, visit www.ryobitools.com
TROUBLESHOOTING
POSSIBLE CAUSE
Tines are clogged by dirt and
debris.
Vines, grass or other debris
wrapped around tine shaft.
Battery is not secure.
Battery is not charged.
The unit is overloaded.
or call (toll free) 1-800-525-2579.
9 — English
SOLUTION
Remove the battery pack, then remove any
obstruction from the tines.
Remove the battery pack, then clean the tine shaft.
To secure the battery pack, make sure the latches
on each side of the battery pack snap into place.
Charge the battery pack according to the instructions
included with your model.
Release the switch trigger and raise the tines. Restart
the cultivator and slowly lower the tines back to their
original depth.