Team kalorik TKG SIS 9 Manual De Instrucciones página 11

Fax +32 2 359 95 50
Do not use the iron if it has fallen, if it shows any visible signs of damage or if it leaks.
When you place the iron on its support (if available with the model), make sure that the
surface on which you put it is stable.
Proceed the same way if the water tank stops working or is damaged. To avoid the risk of
electric shock, do not disassemble the iron or steam tank, take it to a qualified technician
for examination and repair. Incorrect re-assembly can cause a risk of electric shock when
the iron or steam tank is used.
Fully unwind the mains cord and supply hose before starting to iron.
The steam tank switch should always be turned to "0" before plugging or unplugging the
power cord from outlet.
Unplug the appliance and allow the iron and the water tank to cool down before
cleaning or storing them and for pressurized steam iron station (depending on the model)
before opening, filling or emptying the water tank.
FOR PRESSURIZED STEAM IRONING STATION (DEPENDING ON THE MODEL), NEVER UNSCREW
THE CAP OF THE STEAM TANK WHILE THE APPLIANCE IS CONNECTED TO THE MAINS WALL
SOCKET AND ESPECIALLY WHEN STEAM IS BEING PRODUCED.
Competent qualified service: after-sales department of the producer or importer or any
(*)
person who is qualified, approved and competent to perform this kind of repairs in order to
avoid all danger. In case of need you should return the appliance to this service.
STEAM IRON: USE PRECAUTION AND TEMPERATURES
• Always check first if a label with ironing instructions is attached to the article to be ironed.
Follow these ironing instructions in all cases.
• If ironing instructions are missing but you know the kind of fabric, then see the table for
recommended ironing temperatures.
Kind of textile
Synthetic (e.g. acetate,
acrylic, viscose,
polyamide, polyester...)
Silk
Wool
Cotton
Linen
• Plug in the appliance and press the power switch (12). The red pilot light (15) comes on
indicating that the appliance is operating. The yellow pilot light (14) also comes on
indicating that the water tank is heating.
• Set the temperature dial of the iron (9) to the desired position. The pilot light of the iron (1)
will come on, indicating that the iron is heating. As soon as the desired temperature is
reached, the pilot light will go out, and you can start ironing.
Copies of the I/B. Please reproduce them without any
changes except under
International BELGIUM. The pages must be reproduced and
folded in order to obtain a booklet A5 (+/- 148.5 mm width x
210 mm height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don't change
the page numbering. Keep the language integrity.
Temperature dial
MIN
⏐
⏐
⏐
⏐
⏐
⏐
MAX
11
Assembly page 11/44
special instruction from
Steam ironing
OFF
/
/ /
TKG SIS 9 - 100226
Team