General Settings; Operating Settings - Elnur Gabarron ECOMBI SOLAR Serie Instrucciones De Uso

3.5. Advanced settings
With the advanced settings menu, you can change general settings in the device, as well as its advanced operating settings. To
access the advanced settings menu, press
comprises the following parts:

3.5.1 General settings

- LANGUAGE: Select the language that you want.
- UNITS: Choose between "Celsius" and "Fahrenheit", according to the temperature unit that you want.
- AUTOMATIC TIME CHANGE: Activate or disable the automatic time change, from winter to summer and vice-
versa.
- AMPLIFIER: Activate or disable the sound of the keystrokes on the keyboard.
- SCREEN:
Time on: selects the time it takes for the display to turn off after you stop using
o
the keyboard.
Brightness activated: selects the percentage of brightness when the screen is on.
o
Brightness disabled: selects the percentage of brightness when the screen is off.
o
Style: select the screen design style.
o

3.5.2 Operating settings

- BLANCING HEATING ELEMENT:
Status: Balancing heating element active or inactive.
o
Maximum peak times: Maximum operating time of the balancing heating element during tariff on-peak
o
periods. Set this value to "0" to disable the operation of the balancing heating element in tariff on-peak
periods; in this case the charge correction will not work and the same level of charge will apply to every
day. (Factory setting: 5 hours for nominal charge of 8 hours, 3 hours for nominal charge of 14 hours).
Weekend restriction: Restricted operation of the balancing heating element at weekends. If this is activated,
o
the restriction set in "Maximum peak times" for the maximum operating times also applies to weekends. If it
is disabled, this restriction does not apply to weekends. (Factory setting: On). Only available if the device is set
to 8 hours nominal charging time.
- FROST PROTECTION: Activate or disable the frost protection mode if the device is operating in Off mode.
- OVERLOAD PROTECTION: Protection against excessive temperature whilst charging. Degrees above the comfort
setpoint at which the storage heater stops charging. (Selectable values 0,1,2,3,4 and 5).
for 5 seconds and then select the "Advanced" menu. The Advanced Settings menu
•
General settings.
•
Operating settings.
•
Reset.
•
Parameters (Reserved for installer and factory settings. Any change can alter the behaviour of the
device).
Light B/W: white background and black letters.
▪
▪ Dark B/W: black background and white letters.
▪ Colour: Home screen with coloured icons.
23