Rosenbauer NAUTILUS 4/1 Información Para El Usuario página 18

Rosenbauer – NAUTILUS 4/1 & NAUTILUS 4/1 ECO
5. PUMP OPERATION
CAUTION: The NAUTILUS submersible pump is designed
exclusively for use by trained fire department staff.
5.1. Required personal protection equipment
See safety note: helmet, boots, gloves
5.2. Using the pump
1. Before using the NAUTILUS check that the power supply matches the
details on the type plate.
CAUTION: Only connect the submersible pump to a socket that is in
perfect working order and protected by an appropriate fuse (max.
40 m extension cable).
CAUTION: According to DIN 14425 the pump may only be run without
additional safeguards on generators that comply with DIN 14685 and
on switch cabinets for generators built into firefighting vehicles in line
with DIN 14686. If any other power source is used to power the
NAUTILUS outside of fire service operations, a portable protective
device according to DIN VDE 0661 must be fitted between the socket
and the connecting plug. We recommend:
▪
Operator protection device PRCD-K (Article no. 933009) for use of
the NAUTILUS pump on a generator
▪
Operator protection device PRCD-S (Article no. 933008) for use of
the NAUTILUS pump with domestic power supply.
CAUTION: Failure to observe the instructions above can cause
damage to the submersible pump or danger of electric shock.
2. Connect the discharge hose to the discharge outlet and immerse or
submerge the NAUTILUS in the medium to be pumped.
18