Installation Using The Screw Holes On The Side Of This Unit - Pioneer AVH-P6850DVD Manual De Instalación

A Title (English) Installation

Installation using the screw holes on the side of this unit

1. Remove the frame.
2. Fastening this unit to the factory radio mounting bracket.
Position this unit so that the brackets screw holes and its screw holes are aligned (are fit-
ted), and tighten the screws at 3 or 4 locations on each side. Use either the binding screws
(5 × 6 mm) or flush surface screws (5 × 6 mm), depending on the shape of the bracket's
screw holes.
Factory radio mounting bracket
Binding screw or
flush surface screw
Be sure to use the
screws supplied
with this product.
Note:
• In some types of automobiles, descrepancy may occur between the main unit and the dashboard. If
this happens, use the supplied panel to fill the gap.
• To some types of automobiles, ths unit cannot be properly installed. In such case, use the installa-
tion kit ADT-VA133 (sold separately).
13
If the pawl gets in the
way, bend it down
Dashboard or console
Fig. 12
Fig. 13