Enabling The Dma Setting - IBM OPTIONS 46P6374 Guia Del Usuario

Note: For Windows 95, the DVD movie player is supported by Windows 95
OSR2.0 or later versions. You can check which version of Windows 95
you are using by doing the following:
1. Click Start, move the cursor to Settings, and then click Control
Panel.
2. Double-click System.
Read the numbers under "System".
v 4.00.950B means that your version is Windows 95 OSR2.0 or
OSR2.1.
v 4.00.950C means that your version is Windows 95 OSR2.5.

Enabling the DMA setting

This section applies to Windows 95, Windows 98, and Windows 2000. Go to
the appropriate section:
v "For Windows 95 and Windows 98"
v "For Windows 2000"
For Windows 95 and Windows 98
1. Click Start, move the cursor to Settings, and click Control Panel.
2. Double-click System.
3. Click Device Manager.
4. Double-click the CDROM icon. The CD-RW/DVD drive name appears
under the CDROM icon.
5. Double-click the drive name.
6. Click the Settings tab.
7. Check the DMA and Auto insert notification check boxes. If the alert
window opens, click OK to close it.
8. Click OK.
9. Click Close to close the System Properties window. A message displays,
informing you that the system settings have changed.
10. Click OK to restart the computer.
For Windows 2000
1. Click Start, move the cursor to Settings, and click Control Panel.
2. Double-click System.
3. Click the Hardware tab.
4. Click the Device Manager button.
5. Click IDE ATA/ATAPI controller to pull down the submenu.
6. Double-click Secondary IDE. (Double-click Primary IDE if you are using
the ThinkPad A21e computer.)
1-6
®
ThinkPad CD-RW/DVD Combination II Ultrabay
™
2000 Drive User's Guide