Selecline 600081548 Manual De Utilización página 19

TROUBLESHOOTING
Caution! Before troubleshooting, disconnect the power supply. Any
troubleshooting beyond what is described below should be done by a qualified
electrician.
Important! There are some sounds during normal use, such as those from the
compressor and refrigerant circulation.
If the malfunction repeats, contact the Service Center.
Problem
Appliance doesn't work.
The food is too warm.
Appliance cools too
much.
Possible Cause
Temperature
regulation knob is set
at number 0.
Mains plug is not
plugged in or is loose.
Fuse has blown or is
defective.
Socket is defective.
Temperature is not
properly adjusted.
Door was left open for
an extended period of
time.
A large quantity of
warm food was placed
in the appliance
within the last 24
hours.
The appliance is
situated near a heat
source.
Temperature is set too
cold.
19
Solution
Set the knob at another
number to switch on
the appliance.
Insert mains plug.
Check fuse, replace if
necessary.
Mains malfunctions are
to be corrected by an
electrician.
Please review the
Temperature Setting
Recommendation
section.
Open the door only as
long as necessary.
Temporarily turn the
temperature regulator
to a colder setting.
Please review the
Installation Location
section.
Temporarily turn the
temperature regulation
knob to a warmer
temperature.