Thrustmaster TX SERVO BASE Manual Del Usuario página 2

ENGLISH: CHECKING AND, IF NECESSARY, RECONFIGURING THE RACING
WHEEL'S CENTER VALUE
•
Check the racing wheel's center value:
- On PC, access the Control Panel, then set the rotation angle to 900° using the slider.
- Turn your wheel until you reach the 50.0% axis marker displayed in the Control Panel, and then check to make sure
that your racing wheel is perfectly centered, physically (i.e. completely horizontal).
•
Reconfiguring the racing wheel's center value
(If the racing wheel is slightly off-center in the Control Panel)
- If using a Xbox, we recommend performing this procedure in the Xbox system's menu (not in a game).
- If using a PC, we recommend performing this procedure via the Windows® Desktop (not in a game), after exiting the
Control Panel.
1) Connect the racing wheel's USB cable (on Xbox or on PC), then wait for the auto-calibration phase to end.
2) Turn the racing wheel fully to the left (until you reach the stop).
3) Turn the racing wheel fully to the right (until you reach the stop).
4) Make sure that your racing wheel is perfectly centered; while holding it in this position, press these buttons
simultaneously:
* Y (button 3) + X (button 5) + MODE on the TX Racing Wheel Ferrari 458 Italia Edition wheel
* Y (button 10) + X (button 3) + MODE on the TM Leather 28 GT Wheel Add-On
2