Precor UBK 665 Referencia Rápida página 4

Cardio Equipment Quick Reference Maintenance Guide
For complete maintenance and cleaning information, visit us at
www.precor.com. For torque settings, review the product Assembly
Guide included with your equipment, or go to www.precor.com for
more information.
IMPORTANT
The owner is responsible for maintaining Precor equipment in
their facility based on the recommendations below and any
accompanying material.
Weekly maintenance tasks
Cleaning procedures
Use a lint-free cloth dampened with water or an approved cleaner in
the procedures below.
• Clean the floor under the equipment. DO NOT lift and hold
equipment while vacuuming. When the floor is completely dry,
restore power and return the equipment to its level position.
• Clean all surfaces of the frame and plastic components. Keep
excess moisture away from electronic components to prevent
electrical shock or damage, and dry completely.
• Use a soft nylon scrub brush to clean grooves and textured
surfaces on foot contact locations.
• On LCD- or PVS-equipped equipment, clean the screen using only
a diluted solution of one part 91% isopropyl alcohol to one part
water on a damped, lint-free cloth. Dry completely.
• For elliptical and treadmill only Clean debris from all wheels (for
treadmill and elliptical) and CrossRamp® (for elliptical). Dry
completely.
Other weekly maintenance tasks for all equipment
• Unplug the power cords from any equipment or entertainment
devices plugged into a wall outlet. For treadmill: Turn off the
circuit breaker.
• Verify all equipment feet sit squarely on the floor, and adjust if
necessary to ensure the equipment does not wobble.
• Verify that the power cords are not damaged or pinched.
• Plug in the equipment, turn it on, and verify the following features
are performing properly:
• Handheld Heart Rate (HHHR)
• Incline, Speed, and Resistance controls
• Elliptical only
• Elevate the equipment to its maximum incline.
• Clean the ramp (no disassembly required). Debris build-up will
shorten the life of the product.
• If the wheels on your EFX are squeaking, thoroughly clean the
wheel track. Apply a thin coating of mineral oil to the wheel
track and wipe off excess oil with a dry, lint-free cloth.
NOTE
Using too much oil will cause dirt and debris to
accumulate and potentially damage the ramp surface.
• Treadmill only
• Verify the safety lanyard works.
• Emergency Stop Button
• Elevate the equipment to its maximum incline.
• Follow the procedures, Check the alignment of the running belt
and Adjust the running belt, in this Guide.
5