840136200 Ev02
6/29/05
Fabric Setting Chart
Steam
Temperature Setting
Setting
1
1
2
3
3
4
5
Caring for Your Iron
Iron
1. The Water Tank of your iron should
be emptied after each use. Turn
Adjustable Steam to Dry Iron
Press Temperature Selector.
Set Fabric Setting Indicator to
OFF/0. Unplug the iron and hold
over a sink. Turn iron upside down
until Water Tank opening is parallel
with sink. Water will run out of water
tank opening.
2. After iron has completely cooled, fully
retract cord into iron or loop cord
loosely around iron, as applicable,
and store in an upright position.
Do not store iron laying flat on
soleplate.
6
9:55 AM
Page 6
Ironing Instructions
OFF/0
Acrylic
Dry iron using spray if necessary.
Silk
Dry iron on the wrong side of the fabric.
Polyester
Iron while fabric is still damp.
Rayon
Dry iron using spray if necessary.
Wool
Use a press cloth and steam iron on wrong
side of fabric.
Iron while still damp; use steam and/or spray.
Cotton
Iron on wrong side of fabric while still damp.
Linen
.
Soleplate
1. Never iron over zippers, pins, metal
rivets, or snaps, as these may scratch
the soleplate.
2. To clean occasional build-up on the
soleplate, wipe with a sudsy cloth.
Do not use abrasive cleansers or
metal scouring pads.
3. Always store iron upright in the heel
rest position.