Tascam DR-44WL Guia Del Usuario página 3

Connecting a smartphone or other device to an external router
1.
Select "Settings" w "Wi-Fi" on the device.
iOS device example
2.
When the device Wi-Fi is turned on, a Wi-Fi device SSID list will
appear. Select the SSID of the external router to use.
iOS device example
3.
Input the password for that external router.
A Wi-Fi connection between the smartphone and the external
router will be established.
Checking the Wi-Fi connection information
1.
When the Wi-Fi screen is open, use the wheel to select the
INFO item, and press the ENTER/MARK or / button.
Exec appears selected for the INFO item.
2.
Press the ENTER/MARK button to open the INFORMATION
screen.
NAME, MAC ADDRESS, and IP ADDRESS information is shown.
NAME shows the name to select when using TASCAM DR
CONTROL to operate this unit.
MAC ADDRESS shows the MAC address assigned to the unit.
Android device example
Android device example
DR-44WL
IP ADDRESS is the number on the Wi-Fi network assigned by
the router.
Launching TASCAM DR CONTROL
1.
After completing the Wi-Fi connection, launch the TASCAM DR
CONTROL app (installed beforehand) on the smartphone or
other device.
NOTE
Always use the latest version of TASCAM DR CONTROL.
2.
A screen like the following will appear when the app launches,
and remote operation of the device will be enabled.
iOS device example
When multiple DR-44WL/DR-22WL units are connected to the
same router in VIA ROUTER mode
1.
A little while after the app launches, "DR List" will appear.
Select the DR-44WL that you want to control.
iOS device example
2.
If "DR is not found" appears, touch the "OK" button, then
touch the "CONNECT" button to reacquire the list.
iOS device example
Android device example
Android device example
Android device example
TASCAM DR-44WL
3