I GP*
/ALBM*
+/– buttons*
1
2
To skip groups/albums (press); skip groups/
albums continuously (press and hold).
J
(front panel release) button
K SEEK –/+ buttons
CD:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); reverse/fast-
forward a track (press and hold).
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
L SOURCE button
To power on; change the source (Radio/CD/
MD*
4
/AUX).
M PTY (Programme Type) button
To select PTY in RDS. After pressing
(PTY), press (SEEK) –/+ to search for a
station.
N MODE button
To select the radio band (FM/MW/LW)/
select the unit*
5
.
O RESET button (located behind the front
panel)
Detach the front panel and press the RESET
button with a pointed object, such as a
ballpoint pen.
Notes
• Before operating the unit for the first time, or
after replacing the car battery or changing the
connections, you must reset the unit.
• Pressing the RESET button will erase the clock
setting and some stored contents.
P Number buttons
CD/MD*
4
:
(3): REP
(4): SHUF
(6): PAUSE*
6
To pause playback. To cancel, press
again.
Radio:
To receive stored stations (press); store
stations (press and hold).
Q SENS/BTM button
To improve weak reception: LOCAL/MONO
(press); start the BTM function (press and
hold).
For details on the BTM function, see
"Storing stations automatically" on page 4.
R Receptor for the card remote
commander
S AUX input jack
3
The following buttons on the card remote
commander have also different buttons/functions
from the unit.
w; < (.)/, (>) buttons
wa VOL (volume) +/– button
ws ATT (attenuate) button
wd SEL (select) button
wf M (+)/m (–) buttons
wg SCRL (scroll) button
wh Number buttons
*1 When an ATRAC CD is played.
*2 When an MP3/WMA is played.
*3 If the changer is connected, the operation is
different.
*4 When an MD changer is connected.
*5 When a CD/MD changer is connected.
*6 When playing back on this unit.
Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless (SOURCE) on the unit is pressed, or a disc is
inserted to activate the unit first.
Warning if your car's ignition has no
ACC position
After turning the ignition off, be sure to press
and hold (OFF) on the unit until the display
disappears.
Otherwise, the display does not turn off and
this causes battery drain.
To connect a portable audio device.
To control CD/Radio, the same as (SEEK)
–/+ on the unit.
To adjust volume.
To attenuate the sound. To cancel, press
again.
To select items.
To control CD, the same as (GP/ALBM) +/–
on the unit.
To scroll the display item.
To receive stored stations (press); store
stations (press and hold).
3
GB