Detaching The Front Panel; Setting The Clock; Attaching The Front Panel; Storing Stations Automatically - Sony CDX-GT30RN Guía Rápida

Detaching the front panel

You can detach the front panel of this unit to
prevent theft.
1
Press (OFF).
The unit is turned off.
2
Press , then pull it off towards you.

Attaching the front panel

Engage part A of the front panel with part B of
the unit, as illustrated, and push the left side into
position until it clicks.
4
GB
A
B
SET UP

Setting the clock

The clock uses a 24-hour digital indication.
1
Press and hold the select button.
The setup display appears.
2
Press the select button repeatedly
until "CLOCK-ADJ" appears.
3
Press (DSPL).
The hour indication flashes.
4
Rotate the volume control dial to set
the hour and minute.
To move the digital indication, press (DSPL).
5
Press the select button.
The setup is complete and the clock starts.
Tip
You can set the clock automatically with the RDS
feature.
For details, see "Adjusting setup items" on page 6,
and set to "CT-ON" (Clock Time).
RADIO
Storing stations
automatically
— BTM
The unit selects strong signal stations and stores
them. You can store up to 6 stations per band
(FM1, FM2, FM3, MW, or LW).
Caution
When tuning in stations while driving, use BTM
(Best Tuning Memory) to prevent an accident.
1
Press (SOURCE) repeatedly until
"TUNER" appears.
To change the band, press (MODE)
repeatedly. You can select from FM1, FM2,
FM3, MW or LW.
2
Press and hold (SENS/BTM) until
"BTM" flashes.
The unit stores stations in order of frequency
on the number buttons.
A beep sounds when the setting is stored.