Diode Testing - Promax MD-200B Manual De Instrucciones

AC Current
Range Resolution
4 mA 1 µA
40 mA 10 µA
400 mA 100 µA
10 A 10 mA
10 A range 30 seconds maximum above 10 A.
Conversion of AC: Mean measured - Rms. value displayed
Input protection By means of fuses in both inputs. See maintenance section.
Resistance
Range Resolution
400Ω 0,1Ω
1 Ω
4 kΩ
10 Ω
40 kΩ
100 Ω
400 kΩ
4 MΩ 1 kΩ
40 MΩ* 10 kΩ
Low-Power Ohm's open circuit Voltage
High-Power Ohm's open circuit Voltage
* 40 MΩ range to measure the resistance of 4MΩ ~ 40MΩ only.
NOTE: If problems occur with stability when reading high resistance ranges.
Improvement can be obtained using the battery as a power source rather than the AC
mains supply.

Diode testing

Range Resolution
± 1,5 % read.
1 mV
Input protection: 600 V DC or AC rms.
Page 4
All manuals and user guides at all-guides.com
Accuracy
± 1,5 % reading ± 5 digits
40 Hz to 1 KHz
± 2,5 % reading ± 5 digits
40 Hz to 1 KHz
Accuracy
± 0,6 % reading ± 3 digits
± 0,6 % reading ± 2 digits
± 0,8 % reading ± 3 digits
± 1,8 % reading ± 5 digits
450 mV approx.
900 mV approx.
Max. Test
Accuracy
Current
0,6 mA
± 5 dig.
USER'S MANUAL. MD-200B
Voltage Burder
800 mV max.
1 V max.
Over Load
Protection
600 V DC or AC
rms
Max. Open
Circuit Voltage
3,0 V DC
03/2006