Measure Time; Operation Note - Nokia 2126 Manual Del Usuario

O r g a n i z e r

Measure time

1. In the standby mode, select
Lap timing > Start. The running time is displayed on the screen.
Select Split to note the lapsed time. The timer continues to run. The split time
appears below the running time. If you split the time more than once, the new
measured time appears at the beginning of the list. Scroll to see previous
measured times.
Select Lap to note the lap time. The clock stops, then starts immediately from
zero. The lap time appears below the running time. If you take more than one
lap time, the new measured time appears at the beginning of the list. You can
scroll to see previous measured times. When you select Stop, the total time
appears at the top.
2. Select Stop to end the timing. The total time is displayed on the screen.
3. Select Options >
4. Enter a name for the measurement, and select OK. If you do not enter a name,
the total time is used as the default title for the time.

Operation note

If you press the end key and return to standby mode, the clock continues to run in
the background, and
To return to the stopwatch options, do the following:
1. In the standby mode, select
Show last time,
2. To stop the clock, select Stop.
60
Menu >
Save to save the split or lap time.
appears in the upper left corner of the screen.
Menu >
Split timing, Lap timing,
Organizer > Stopwatch
Organizer > Stopwatch
View times, and
> Split timing or
> Continue >
Delete times