Publicidad
Stack and Bounce top and middle pole sections
6.
together.
Bounce pole sections together until top section no
7.
longer moves toward taped reference mark.
IMPORTANT!
POLES MUST OVERLAP 4" TO 5" (10.2-12.7CM)
WOOD SCRAP
• Chute de Planche
• Madera Sobrante
• Tavolozza di Legno
• Madeira de Refugo
• Holzbrett (Abfallstück)
• Stukje Hout
• Trækrot
• Trebit
• Använt Trästycke
WARNING!
DO NOT PROCEED
TO STEP 8
UNTIL CONCRETE
HAS CURED!
IMPORTANT!
FAILURE TO FILL YOUR POLE COMPLETELY WITH
CONCRETE AS DESCRIBED IN THESE INSTRUCTIONS
WILL VOID ALL WARRANTIES WRITTEN AND IMPLIED.
P/N 205331C
10/01
WOOD SCRAP
• Chute de Planche
• Madera Sobrante
• Tavolozza di Legno
• Madeira de Refugo
• Holzbrett (Abfallstück)
• Stukje Hout
• Trækrot
• Trebit
• Använt Trästycke
PLAYING SURFACE
Fit upper pole sections to bottom section.
8.
After pole sections are positioned use sledge
9.
hammer and a wood scrap to pound pole sections
together.
IMPORTANT!
10.
poles no longer move toward taped reference mark
on bottom pole, overlapping 4"-5" (10.2-12.7cm).
Fill pole with concrete approximately 1" (2.54cm)
11.
below bottom hole (as shown above).
20
PLAYING SURFACE
• Surface de jeu
• Superficie de juego
• Superficie di giuoco
• Área de Jogo
• Spielfläche
• Speeloppervlak
• Spilleflade
• Spillebane
• Spelplan
Pound pole sections together until
Publicidad
