Avtech AVH800A6 Manual Del Usuario página 5

CONNECTION
Camera IP Configurations by LAN
Note: Before connecting the system and powering on the NVR, make sure a hard disk is installed in the
NVR for evidentiary recording. To know how to install a hark disk, please refer to "HARD DISK
INSTALLATION" at page 1
AUTO Mode
Auto mode is to simplify the complicated network settings within three minutes. The connection mode of the LAN
port is "AUTO" by default. This mode is suitable when the LAN port of the NVR is connected to a hub.
Note: SETTING Path:
 Local connection only allows monitoring locally. To monitor from anywhere other than the NVR is installed,
please connect your NVR to Internet. For details, please refer to the user manual supplied in your CD.
 Remote connection is available only when the NVR is connected to Internet. To connect your NVR to Internet,
please refer to the user manual supplied in your CD.
(ADVANCED CONFIG)  NETWORK  LAN  MODE.
3
h800_800ea6_network_V1.2