Braun Oral-B PULSONIC SMART Serie Manual Del Usuario página 14

that the dentist recommended 2-minute brushing
time has been reached.
Both timers memorize the elapsed brushing
time, even when the handle is briefly switched
off during brushing. When pausing longer
than 30 seconds, the timer resets to the initial
starting point.
The «Count up Timer» displays your actual
brushing time. The «Count down Timer»
indicates the remaining brushing time. Starting
with «2:00» minutes, it goes down to «0:00».
When brushing longer than two minutes, it
automatically changes to the «Count up Timer».
The total brushing time can be extended to
3 minutes by using the «Extended Clean» mode
(see «Brushing modes» for more details).
Your toothbrush comes with the «Professional
Timer» and the «Count up Timer» activated. If
you wish to change these settings, proceed as
follows:
• Press and hold the brushing mode button (c)
for 3 seconds until the SmartGuide display unit
(i) shows «:30» and «timer».
•
3 sec.
• By briefly pressing the on/off button (b), switch
to the «2-Minute Timer». Confirm your choice
by pushing the mode button (c).
•
• This will lead you directly to the «Count up
Timer» display («up» and «timer» will be
shown). Switch to the «Count down Timer» by
14
pressing the on/off button and confirm it with
the mode button.
•
• To leave the setup menu press the mode
button again. The setup mode will be ended
automatically if no button is pressed for
60 seconds. Please note that all 3 pilot lights
are flashing while being in the setup menu.
SmartGuide display unit
Displayed Meaning
Icon
«Daily Clean» mode
«Sensitiv» mode
«Massage» mode
«Polish» mode
«Extended Clean» mode
«Quadrant circle» – currently you
are brushing in the first 30-second
interval (45-second interval within
Extended Clean mode). Move to
the next quadrant of your mouth,
when the second segment starts
flashing.
Dentist recommended 2-minute
brushing time (3-minute brushing
time within the Extended Clean
mode) has been reached.
The rechargeable battery of the
handle is low. Charge the
toothbrush handle.
Batteries of the SmartGuide
display unit are low. Change
batteries of the SmartGuide
display unit.