Aiwa JAX-S5 Instrucciones De Montaje página 17

To stop recording
Press s.
To pause recording (only for TUNER or VIDEO/AUX
source)
Press a. Press again to resume.
To record a selected set of tracks from a CD
Program the desired tracks (see "Programed playback") and
then press wREC/REC MUTING.
To record a 4-second blank space (only for TUNER
or VIDEO/AUX source)
1 Press w REC/REC MUTING during recording or in
recording pause mode.
"REC MUTING" flashes in the display for 4 seconds (a
blank space is made in the meantime) and then the unit
enters recording pause mode.
To record less than a 4-second blank space, press wREC/
REC MUTING again while "REC MUTING" flashes.
Recording resumes so that do not carry out step 2 below.
To record more than a 4-second blank space, press wREC/
REC MUTING again after the unit enters recording pause
mode. Each time the button is pressed, a 4-second blank
space is added.
2 Press a to resume recording.
To erase a tape
1 Insert the tape in deck B. Set the tape to the desired point if
needed.
2 Press TAPE A/B to select "TP B".
3 Press wREC/REC MUTING.
Whole tape dubbing
1 Press TAPE A/B to select the TAPE function.
2 Insert the original tape in deck A and the
recordable tape in deck B.
3 Press SYNC DUB.
The tapes are rewound to the beginning of the front side
and recording starts.
•Dubbing cannot start from a point halfway in the tape.
•Only one side of the tape can be recorded at a time.
To stop dubbing
Press s.
Edited CD recording
AI Edit Recording
When recording a whole CD, AI Edit Recording takes the length
of your tape into account and rearranges the recording order of
the tracks if necessary, so that no track is cut short at the end
of the side. Prepare a tape long enough to record the CD.
1 Insert the recordable tape in deck B.
2 Select the CD function and load disc(s).
3 Press SHIFT+EDIT once on the remote.
"AI C-00" appears.
4 Press DISC DIRECT PLAY 1-3 to select a disc.
•DISC SKIP on the remote can also be used to select a
disc.
5 Press the numbered buttons on the remote to
enter the length of the recordable tape.
10 to 99 minutes can be specified.
- For a 60-minute tape press 6 and 0/10.
In a few seconds, the unit determines the tracks to be
recorded for each side.
The recording time left for side A appears in the display.
•r or t on the remote or MULTI JOG can also
be used to specify tape length.
6 Press wREC/REC MUTING to start recording on
side A.
The tape is rewound to the beginning of side A and
recording starts.
Go to the next step when recording on side A finishes.
7 Press SHIFT+EDIT on the remote.
The recording time left for side B appears in the display.
8 Turn over the tape and press w REC/REC
MUTING to start recording on side B.
•AI Edit Recording cannot be used with discs with more than
30 tracks. "TR OVER" appears.
•AI Edit Recording cannot be used with MP3-CDs.
•Recording cannot start from a point halfway in the tape.
To stop recording
Press s. Recording and CD playback stop simultaneously.
To clear the edit program
Press s twice in stop mode.
En
17