Symbol QRG LS1900 Serie Manual De Instrucciones página 4

L S 1 9 0 0
2. Connect the other end of the interface cable to the
host.
3. Connect the power supply to the cable (if neces-
sary).
4. Scan the appropriate bar code(s) beginning on
page 33
Removing the Interface Cable
Unplug the installed cable's modular connector by
depressing the connector clip with the tip of a screwdriver.
Aiming
Note:
6
Scanning In Hand-Held Mode
1. Ensure all connections are secure.
2. Aim the scanner at the bar code. (If your scanner
has a trigger, aim the scanner and press the trigger.)
3. Ensure the scan line crosses every bar and space
of the symbol.
RIGHT
012345
4. Upon successful decode, the scanner beeps and
the LED turns green.
to communicate with the host.
The scanner performs best when it is not ex-
actly perpendicular to the bar code.
S e r i e s
WRONG
012345
2
6
4