Volvo 31664408 Manual Del Usuario página 14

Bicycle holder, roof mounted
en-GB
Introduction
– Regularly check that the bicycle holder
is secured on the load carriers and
that the bicycle's securing devices are
properly tightened.
– Always keep the tensioner arms locked
during transportation.
– Note that wind noise can occur when
the bicycle holder is installed.
– Be aware that the height and driving
characteristics of the car can be
affected when the bicycle holder is
installed.
– Before travelling make sure that the
bicycle holder is securely locked and
that the key has been removed.
– Speed should be adjusted according
to the load being transported and
according to the applicable speed
regulations, though not more than 130
km/h.
– Remove the bicycle holder and roof
load carriers when not in use. This
reduces air resistance which improves
fuel consumption and reduces wind
noise.
– Position the load carriers so that there
is no risk of the tailgate catching the
bicycle holder when it is opened.
12
Contents Adapter kit
Adapter kit for square and aluminium rails
can be purchased separately.