Volvo 31664408 Manual Del Usuario página 18

Bicycle holder, roof mounted
en-GB
Installing on square section and aluminium rails
Note!
An adapter kit that is sold separately
is required for installing on square and
aluminium rails.
– Thread the shorter mounting screw
(64.5 mm) through the front hole of
the bicycle holder's rear bracket and
tighten the tensioner arm a few turns.
– Thread the longer mounting screws (92
mm) into the front brackets and tighten
the tensioner arms a few turns.
16
– Hook the two brackets into place in the
front bracket.
– Hook the third bracket into the rear
bracket.
– Adjust the position of the rear mounting
so that it fits the distance between the
load carriers.