Volvo 31664113 Manual Del Usuario página 11

Removing the square profile mounting
─ Remove the square profile mounting by
unscrewing the knob a few turns and then
pulling it loose.
─ Put the mounting aside.
Fastening kayak holders on oval or wing profile load carrier
Fastening kayak holders on wing profile load
carrier
─ Remove the cover panel on the load
carrier.
─ Remove the rubber seal of the T-track and
put it aside.
─ Slide the kayak holder into the desired
position on the T-track and tighten the
knob.
─ Refit the cover panel.
Kayak holders EN
Fastening kayak holders on oval profile load
carrier
─ Open the cover on the load carrier end
plate.
─ Remove the rubber seal of the T-track and
put it aside.
─ Slide the kayak holder into the desired
position on the T-track and tighten the
knob.
─ Refit the cover.
9