Description Of Accessories; Ec Declaration Of Conformity - Vortice VORTICEL MPC 252 M Manual De Instrucciones

401 Vorticel MPC.qxp

DESCRIPTION OF ACCESSORIES

Intake nozzle
For optimising extraction efficiency (fig. 25).
Flexible connector
For connecting the appliance to the intake or delivery
hose (fig. 26).
Connection flange
For connecting the appliance to the intake or delivery
hose (fig. 27).
Support
For fixing the appliance to the wall (fig. 28).
Protection grille
For protecting the intake against accidental contact
with moving parts if the appliance is installed at an
accessible height (fig. 29).

EC DECLARATION OF CONFORMITY

VORTICE ELETTROSOCIALI S.p.A
Strada Cerca, 2 - frazione di Zoate
20067 TRIBIANO (MI) - ITALY
declares, under his own responsibility, that the
products in the range:
VORTICEL MPC
conform to European Directives
98/37/CEE • CEE 98/37
• CEE 89/336
89/336/CEE
according to the following standards:
EN ISO 12100-1 (2003)
EN 292-1 (1991)
EN 292-2 (1991) + A1 (1995)
EN ISO 12100-2 (2003)
EN 60204-1 (1997)
EN 60204-1 (2006)
EN 294 (1993)
25/05/2007 11.55 Pagina 11
Voltage regulator
3 position speed controllers.
IRM 30 single phase voltage regulator for models
MPC 254 M, MPC 304 M.
IRM 40 single phase voltage regulator for models
MPC 302 M, MPC 354 M, MPC 404 M, MPC 252 M.
IRT 15 three phase voltage regulator for models
MPC 304 T, MPC 354 T, MPC 404 T, MPC 254 T
IRT 35 three phase voltage regulator for model MPC
302 T.
Electronic speed controller
Speed controllers for single phase fans.
IREM 3 for models MPC 254 M, MPC 304 M, MPC
354 M, MPC 404 M.
IREM 5 for models MPC 252 M, MPC 302 M, MPC
304 M, MPC 354 M, MPC 404 M.
IREM 9 for one or more fans, up to a maximum of
9 A, for models MPC 252 M , MPC 302 M, MPC 304
M, MPC 354 M, MPC 404 M.
EN 55014-1 (2000) + A1 (2001) + A2 (2002)
EN 55014-2 (1997) + A1 (2001)
EN 61000-3-2 (2000)
EN 61000-3-3 (1995) + A1 (2001)
EN
11