Dörr DLP-100W Manual De Instrucciones página 15

04.3 Operation with power adapter
Make sure that the main switch (17) is in position "0" (= off). Insert the connector (19a) into the socket (18) at the LED light. Pay
attention to the pins and holes. Screw tight the screw lock (19b).
IMPORTANT: To disconnect the cable connection, make sure to open the screw lock (19b) first!
Connect the power supply (19) to a socket with a mains voltage of 100-240V.
ATTENTION: Do not use an extension cable. Make sure that no one can trip over the cable connections.
04.4 Operation with V-Mount Li-Ion battery (optional)
ATTENTION: Operate the continuous light only with a special V-Mount Li-Ion battery suitable for the continuous light
(optionally available). When inserting the battery, pay attention to the correct polarity (+/-). When not in
use for a longer period of time, please remove the battery.
Make sure that the main switch (17) is in position "0" (= off). Push the battery into the V-shaped battery connector (10) from the
right until the battery audibly clicks into place. To remove the battery again, make sure that the main switch (17) is in position "0"
(= off). Press the unlock button (11). Slide the battery out of the connector to the right.
V-Mount Li-Ion batteries optionally available from DÖRR:
DÖRR Compact V-Mount Li-Ion Battery CVL-98 14.8V, 98Wh
Switch the continuous light on the main switch (17) to position I (=On).
05 | SETTINGS
05.1 Setting the colour temperature
To adjust the colour temperature, turn the blue control dial (15):
·
To the right for cold light with a colour temperature of up to max. 5,500 K
·
To the left for warm light with a colour temperature of up to min. 3,200 K
The set value is shown in the display for colour temperature (13).
05.2 Setting the illuminance
To adjust the illuminance (brightness), turn the white control dial (16):
·
To the right for brighter light up to max. 99% (corresponds to 100%)
·
To the left for darker light up to min. 0%
The set value is shown in the display for illuminance (14).
ATTENTION: After each use, switch off the continuous light at the main switch (17) and disconnect the power
connection.
15 doerr-foto.de