Publicidad
Idiomas disponibles
Idiomas disponibles
Impeller Replacement:
To replace the impeller, use sharp pliers, or a pin, to
remove the gray colored rubber plug, exposing the
impeller screw. Loosen the screw, but do not
remove it. Rotate the impeller by twisting the
impeller assembly clockwise (viewed from the back
of the wind meter). Install the new impeller and
twist the impeller assembly counter-clockwise.
Tighten the screw and replace the gray colored
rubber plug.
Battery:
To replace the battery, turn the compartment cover
in a clockwise direction to remove it. The battery
will be visible in the battery compartment. Insert
2 new CR2032 lithium battery "+" side facing you.
CR2032 batteries can be purchased anywhere
batteries are sold. NOTE: Different modes have
different effects on the battery life.
Publicidad
