HoMedics BPA-201 Manual Del Usuario página 11

1. P ress the User Select Button to choose User 1
or User 2.
START
STOP
2. With the cuff wrapped around your arm, press the START/
STOP button. Do not inflate the cuff unless it is wrapped
around your arm. All digits will light up to check the display
functions. The checking procedure will be completed after
about 3 seconds.
START
STOP
3. After all symbols disappear, the display will show
"00". The monitor is "Ready to Measure" and will
automatically inflate the cuff to start measurement.
Pulse
OR
Pulse Pulse
Pulse Pulse
19
4. T he cuff will begin deflating as measurement continues.
Note: This monitor will re-inflate automatically if the
system detects that your body requires more pressure for
measurement.
5. W hen the measurement is completed,
the cuff will deflate entirely. Systolic
pressure, diastolic pressure and pulse
will be shown simultaneously on the
LCD screen. The measurement is then
automatically stored into memory.
Note:
1. T his monitor automatically turns off approximately 1 minute
Pulse after last operation. You may also press the START/STOP Pulse
button to turn the unit off.
2. To interrupt the measurement, you may press the
START/STOP (recommended), "M," User- Select
or Date & Time Set ( ) buttons. The cuff will deflate
immediately after a buttons is pressed.
Pulse Pulse
Pulse
Pulse
Pulse Pulse
20
Pulse
Pulse