Potential For Electromagnetic Interference - HoMedics BPA-201 Manual Del Usuario

8. D o not disassemble the monitor or cuff. If in need of
repair, refer to the warranty section of this manual.
9. D o not subject the monitor to extreme shocks (do not
drop on floor).
10. Do not inflate the cuff unless wrapped around your arm.
11. D o not wrap the cuff around body parts other than your
arm.
12. D o not drop or insert any object into any o pening or
hose.
13. T o avoid accidental strangulation keep this product
away from children. Do not drape tube around neck.
14. T his monitor may not meet its performance
specifications if stored or used outside of these
temperature and humidity ranges:
• Storage Environment • Operating Environment
Temperature:
- 4°F~158°F (-20°C~70°C)
Humidity:
less than 90% RH
Temperature:
50°F~104°F (10°C ~40°C)
Humidity:
15% ~ 90% RH
27
POTENTIAL FOR ELECTROMAGNETIC
INTERFERENCE
To avoid inaccurate results caused by electro-
magnetic interference between electrical and
electronic equipment, do not use the device
near a cell phone or microwave oven.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) this device may not cause harm-
ful interference, and (2) this device must accept
any interference received, including interference
that may cause undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV interfer-
ence caused by unauthorized modifications to this equipment. Such
modifications could void the user authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harm-
ful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be deter-
mined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
28