English; Package Contents - DeWalt DE2000 Manual Del Usuario

Using routers in a fixed position
• Fit a lightweight mask over your nose and mouth, when routing for a
lengthy period.
• Use protective goggles when routing particle board.
• After work, release the router carriage to protect the cutter.

Package contents

The package contains:
1 Aluminium frame with no-volt release switch
4 Legs
DE2000
1 Router mounting plate
3 Fixing screws
1 Router fence with dust spout
1 Cutter guard
4 Cutting inserts (router)
1 Instruction manual
1 Exploded drawing
• Check for damage to the tool, parts or accessories which may have
occurred during transport.
• Take the time to thoroughly read and understand this manual prior to
operation.
Description (fig. A1 - A3)
Your stable and rigid DE2000/DE2011 Combi-Table has been designed to
extend the versatility of your router or circular saw, enabling them to be
used in a stationary mode.
Fig. A1 - Combi-Table
1 No-volt release switch
2 Socket
3 Fine adjustment clamp
4 Fine adjuster
5 Locking screw (front)
6 Locking screw (back)
7 Star knob
8 Leg
9 Thumbscrew
10 Scale
11-14 Slide rail
15-16 Dovetail grooves
17 Push stick holder
Fig. A2 - DE2011 (option)
18 Saw mounting plate
19 Fixing screws
20 Parallel rip fence with profile (49)
21 Sliding mitre fence
22 Push stick
23 Cutting insert
24 Dust spout
25 Adjustable saw blade guard
26 Dust guard holder
Fig. A3 - DE2000
27 Router mounting plate
28 Fixing screws
29 Router fence with faces (40)
30 Transparent cutter guard
31 Cutter guard bracket
32 Cutting insert
33 Dust spout
19
We recommend the following saws for use with the DE2011 (option):
Elu MH85 D WALT DW62
E
Elu MH151 D WALT DW65
E
Elu MH165 D WALT DW86
E
Elu MH265 Bosch GKS 65
Elu MH286 Bosch GKS 66 CE
We recommend the following Routers for use with the DE2000 Router
Table (all models: construction year from 1990):
Elu MOF96 D WALT DW613
E
Elu OF97 D WALT DW625E
E
Elu MOF131 D WALT DW620
E
Elu MOF177 D WALT DW621
E
With the optional mounting kit (DE2010), the D
DE2000 also accepts most of the common routers in the market and older
models.
Do not mount any Power Tools not specified in this list.
Mains plug replacement (U.K. & Ireland only)
• Should your mains plug need replacing and you are competent to do
this, proceed as instructed below. If you are in doubt, contact an
authorized D WALT repair agent or a qualified electrician.
E
• Disconnect the plug from the supply.
• Cut off the plug and dispose of it safely; a plug with bared copper
conductors is dangerous if engaged in a live socket outlet.
• Only fit 13 Amperes BS1363A approved plugs fitted with the correctly
rated fuse (1).
• The cable wire colours, or a letter, will be marked at the connection
points of most good quality plugs. Attach the wires to their respective
points in the plug (see below). Brown is for Live (L) (2) and Blue is for
Neutral (N) (4).
• Before replacing the top cover of the mains plug ensure that the cable
restraint (3) is holding the outer sheath of the cable firmly and that the
two leads are correctly fixed at the terminal screws.
Never use a light socket.
Never connect the live (L) or neutral (N) wires to the earth pin
marked E or .
For 115 V units with a power rating exceeding 1500 W, we recommend to
fit a plug to BS4343 standard.
Using an extension cable
If an extension cable is required, use an approved extension cable suitable
for the power input of this tool (see technical data). The minimum
2
conductor size is 1.5 mm . When using a cable reel, always unwind the
cable completely.
E N G L I S H
Metabo KsE 1668s-Signal
Metabo Ks 1468 S
Metabo Ks 1255 S
WALT Router Table
E
en - 2