Bastuck L99AH Instrucciones De Montaje página 4

FITTING INSTRUCTION
| 18.06.2021 |
L99AH
Anti-roll bar kit for Austin Healey 100/4 + 3000 BN1 - BJ6
2. Mounting the retaining plates on the front axle
1. Remove the original anti-roll bar.
2. Remove the original anti-roll bar holders from both wishbones.
3. The retaining plates are attached to the wishbones in place of the old anti-roll bar holders using the existing
bolts.
Right-hand side*
3. Mounting the neoprene mounts
1. The neoprene mounts are fixed in place of the original mounts using the existing screws.
2. All screws must be retightened and checked.
*) ATTENTION: The sides are always viewed in the direction of travel!
BASTUCK & Co GmbH Tel.: +49 (0) 68 81 - 9 24 91 01
D-66822 Lebach Fax: +49 (0) 68 81 - 9 24 91 19
- 4 -
service@bastuck.de
www.bastuck.com
left-hand side*