TROUBLESHOOTING
WARNING: Under no circumstances should you try to repair the set yourself as
this will invalidate the guarantee.
If a fault occurs, first check the points listed before taking the set for repair. If you
are unable to solve a problem by following these hints, consult your dealer or
service centre.
No power, or playback does not start
• Insert the battery correctly.
• Replace the battery.
.• Connect the mains adapter securely.
HoLd indication and/or no reaction to controls
• Deactivate HOLD.
No sound or bad sound quality
• Press 2; to resume playback.
• Adjust the volume.
• The track is a data file. Press § to skip to the next audio CD track.
• Check and clean the LINE OUT/p connections.
• Keep this set away from active mobile phones or strong magnetic fields.
no cd indication
• Insert a disc, label upwards.
• Clean or replace the disc.
• Wait until the steamed up lens has cleared.
nF dISC indication
• Make sure the inserted CDR(W) is finalized.
dAtA indication
• Make sure you have inserted an audio disc or an MP3-CD.
TROUBLESHOOTING
Prot indication and music file is not played
• The music file is protected. Make sure the protection option in your encoder
software is deactivated when creating a music file.
• In this case you are responsible for adherenceto all local or international
copyrights.
SELECt indication
• Select tracks for programming before you play your program.
Music file is not played
• Wrong format used eg. VCD, word. Make sure the music file names end with
mp3
Missing directories on MP3-CD
• Make sure the total number of files and albums on your MP3-CD does not
exceed 350.
• Only albums with MP3 files are shown.
The disc skips tracks
• Clean or replace the disc
• Make sure
,
REPEAT
REPEAT ALL
off.
Music is skipped or popping sound when playing an MP3 file
• If the problem persists, encode the audio track again and make a new CD-
ROM.
• CD damaged or dirty. Replace or clean CD.
Music is interrupted and OOPS indication
• Switch ESP on.
CAUTION
Use of controls or adjustments or performance of procedures other than
herein may result in hazardous radiation exposure or other unsafe
operation.
,
,
or
SHUFFLE
SHUFFLE ALL
PROGRAM
is switched