Descargar Imprimir esta página

Basic Functions - Philips EXPANIUM EXP411 Manual De Instrucciones

Publicidad

POWER SUPPLY/HEADPHONES
IMPORTANT!
• Hearing safety : Do not play your headphones at a high volume. Hearing
experts advise that continuous use at high volume can permanently damage
your hearing.
• Traffic safety : Do not use headphones while driving a vehicle. It may create
a hazard and it is illegal in many countries. Even if your headphones are an
open-air type designed to let you hear outside sounds, do not turn up the
volume so high that you cannot hear what is going on around you.

BASIC FUNCTIONS

Playing a disc
With this set you can play
–all pre-recorded audio CDs
–all finalized audio CDR(W)s
–MP3-CDs (CD-ROMs with MP3 )
1 Push the OPEN 2 slider to open the CD lid.
2 Insert a disc, printed side up, by pressing gently on
the disc´s centre so that it fits onto the hub. Close
the lid by pressing it down.
3 Press 2; to start playback.
. yCd rEAd is displayed. Playback starts.
Audio disc: The current track number and the
elapsed playing time are displayed.
MP3-CD: MP3 is shown. The current album number,
track number and the elapsed playing time are dis-
played.
4 Press 9 to stop playback.
yAudio disc: The total number of tracks and the total playing time of the
disc are displayed.
yMP3-CD: The total number of albums and tracks are displayed.
Note : If the total number of album is more than 9, the display will show "− − ";
if the total number of tracks is more than 99, the display will show "− − − − ".
BASIC FUNCTIONS
5 To remove the disc, hold it by its edge and press
the hub gently while lifting the disc.
Note: After pressing 2; it may take some time
until the first MP3 track is played.
Playing Enhanced Music CDs and Mixed Mode
CDs
On Enhanced Music CDs and Mixed Mode CDs there are audio CD tracks as
well as computer data (e. g. text files, pictures, MP3 files,...).
1 Insert the disc and press 2; to start playback.
yC d rEAd is displayed. Playback starts. All audio CD tracks will be
played.
2 If there are MP3 and AAC files on the disc, MP3
blinks. Keep MODE pressed for 2 seconds to
select MP3 playback.
yCd rEAd is displayed. Playback starts
with the first track of the first album. All MP3
will be played.
3 To return to audio CD playback, keep MODE
pressed for 2 seconds.
Note:To protect your headphones and your Hi-Fi
system from damage, you will hear no sound
when a computer (data) file is played. Press § to
skip to the next track.
Pause
1 Press 2; to interrupt playback.
yThe time where playback was interrupted will
blink.
2 To resume playback press 2; again.
TITLE
MP3
ALBUM
TITLE

Publicidad

loading