Mute Function; Transferring / Switching Calls; Connecting With A Pc Or Pda; Troubleshooting - Mr Handsfree Blue Bird Manual Del Usuario

Note:
Due to the different design of some mobile phones, an auto-disconnect may happen even when the Blue Bird
Headset is turned on. In that case, the Headset won't ring when there is an incoming call. Press the S1 button
(3) for 1 sec. to reconnect the Headset with your mobile phone for an incoming call.

MUTE FUNCTION

During conversation, it is possible to mute the microphone.
Press both S1 (3) and S2 (2) buttons at the same time to activate the Mute function.
S2 (2) buttons at the same time again to disable the Mute function.

TRANSFERRING / SWITCHING CALLS

To transfer a call:
Press and hold the S1 button (3) for 3 seconds to transfer the call to the mobile phone while talking on the
Headset. If you want to transfer the call back to the Headset, press the S1 button (3) again.
To switch to a second call:
Press and hold the S2 button (2) for 3 seconds to switch to a second call during a call. This function only
works when your mobile phone service provider provides this service.

CONNECTING WITH A PC OR PDA

You are allowed to connect the Blue Bird Headset with a Bluetooth
with Audio Gateway Profiles. Please refer to the user manual of your Bluetooth
information.
TROUBLE SHOOTING
1. The red LED indicator flashes.
2. No indication of charging is
shown.
3. No sound contact between
the Blue Bird Headset and
other devices.
m_BlueBird_GB.pmd 4
®
enabled PC or PDA that is supported
® enabled PC or PDA for setup
The Headset is running low on battery. Charge the Headset for
2 hours until the red LED indicator turns off.
For the Headset battery that is empty, or has not been used for
a long time, it may take a couple of minutes for the Headset in-
dicator to show charging status with a steady red light.
- Make sure that the two devices have been paired.
- Make sure that the Headset is turned on.
- Make sure that the two devices are within a working range
(10 m).
- Make sure that your mobile phone is within signal strength.
- Some Bluetooth mobile phones can support only one
®

Bluetooth

Headset. Disconnection may happen when there
is more than one Headset paired with your mobile phone.
English
05.12.2005, 13:36
Press both S1 (3) and