Sending commands to your vehicle
Whether you want to remote start the engine, lock/unlock the
doors or pop the trunk, there are 3 possible ways you can send
commands to your vehicle, using the:
•
Factory remote.
•
Aftermarket remote.
•
Directed SmartStart application via your smartphone.
If applicable, you can also start the engine remotely by either
pressing the Lock button 3 times quickly or by pressing Lock,
Unlock, and Lock quickly on your factory remote. Check with
your installer to find out which method is configured in your
vehicle.
Control center
Your system comes with a control center. Check with your installer
for the location in the vehicle. The LED gives the system status
indication, and the control center button is used for putting the
system into valet mode and for pairing your smartphone.
Control Center
© 2019 Directed. All rights reserved.
LED
Button
LED
1