Alarm/Security Valet Mode - Autostart Signature Serie El Manual Del Propietario

Use the following steps to manually enter and exit remote start
valet mode:
Insert your key in the ignition
barrel, and turn it to the ON
Key OUT
position.
1
OR
Press the PTS button once or
twice.*
Turn the key to the OFF position.
2
OR
Press the PTS button once more.
Immediately press and hold the control
3
center button until the parking lights flash 9
times.
* The number of times the PTS button is pressed depends on the vehicle.
Check with your installer for the correct number. Make sure you do not
have your foot on the brake pedal during this step.
The parking lights will flash nine times
remote start valet mode, and nine times

Alarm/security valet mode

When alarm/security valet mode is on, system convenience
features such as door locks, parking light flash, and comfort
closure remain functional, while security features (if installed) such
as alarm triggers, confirmation chirps, passive arming, auto re-
arming, and passive starter disable are deactivated.
4
Key IN
START START
Key IN
START
OR
Key OUT
START
OR
quickly
slowly
© 2019 Directed. All rights reserved.
Key IN
START
OR
Key IN
START
Control Center
when entering
when exiting.
Key IN
LED
Button
LED