Publicidad
Idiomas disponibles
Idiomas disponibles
Begin removing remaining tape liner, beginning with the drivers side CENTER TOP. Grasping the free end,
pull tape gently in 6" (15 cm) sections, while applying even pressure with hand to Aeroskin. Repeat process for
6
NOTE: Do not apply pressure closer than 6" (15 cm) to tape liner as it could accidentally break.
Using the same process, remove tape liner from the driver side CENTER BOTTOM of hoodskin. Repeat for
7
Again using the same process, remove tape liner from the driver side FAR SIDE EDGE of Aeroskin.
8
Again using the same process, remove tape liner from
the driver side FAR BOTTOM EDGE of hoodskin.
Repeat for passenger side.
9
passenger side.
passenger side.
Repeat for passenger side.
NOTE: Some applications do not
have side tape by design.
Press firmly along all edges of Aeroskin to ensure
10
CAUTION: You must apply even
pressure from center section
out to each end of part, in order
for proper adhesion to hood.
CAUTION: You must apply even
pressure from center section
out to each end of part, in order
for proper adhesion to hood.
adhesion of tape to hood surface.
3 / 4
Publicidad
