Setting Up The Tv With Your Pc - Samsung 4 Serie Manual Del Usuario

Basic Features
✎
nOTE
x
After selecting Zoom1, Zoom2 or Wide Fit:
1. Press the ◄ or ► button to select Position.
2. Press the EnTERE button.
3. Press the ▲, ▼, ◄ or ► button to move the
picture up or down.
4. Press the EnTERE button.
5. Press the ◄ or ► button to select Reset.
6. Press the EnTERE button to reset the picture
to its default position.
x
After selecting screen Fit in HDMI (1080i / 1080p)
or Component (1080i / 1080p) mode: Adjusts the
Position or Size by using ▲, ▼, ◄ or ► button.
x
HD (High Definition): 16:9 - 1080i/1080p (1920x1080),
720p (1280x720)
x
Settings can be adjusted and stored for each
external device you have connected to an input on
the TV.
Input source
TV, AV,
Component (480i, 480p)
DTV(1080i),
Component (1080i, 1080p),
HDMI (720p, 1080i, 1080p)
PC
Digital noise Filter (Off / low / Medium / high / Auto
■
/ Auto Visualization / Demo): If the broadcast signal
received by your TV is weak, you can activate the Digital
noise Filter feature to reduce any static and ghosting that
may appear on the screen.
✎
When the signal is weak, try other options until the
best picture is displayed.
Auto Visualization : When changing analog channels,
displays signal strength.
✎
Only available for analog channels.
✎
When bar is green, you are receiving the best
possible signal.
MPEg noise Filter (Off / low / Medium / high /
■
Auto): Reduces MPEG Noise of the picture.
✎
Disabled under PC mode.
hDMI Black level (normal / low)
■
level on the screen to adjust the screen depth.
✎
Available only in HDMI mode (RGB signals).
Film Mode (Off / Auto1 / Auto2)
■
automatically sense and process film signals from all
sources and adjusts the picture for optimum quality.
✎
Available in TV, AV, COMPONENT (480i / 1080i)
and HDMI (480i / 1080i).
Auto Protection Time (2 hours / 4 hours / 8 hours
■
/ 10 hours / Off): If the screen remains idle with a still
image for a certain period of time defined by the user,
the screen saver is activated to prevent the formation of
ghost images on the screen.
16
English
Picture size
16:9, Zoom1,
Zoom2, 4:3
16:9, 4:3, Wide Fit,
screen Fit
16:9, 4:3
: Selects the black
: Sets the TV to
Picture Reset (OK / Cancel)
Resets your current picture mode to its default settings.

setting up the TV with your PC

¦
Set the input source to PC.
Auto Adjustment
O
m → Picture → Auto Adjustment →
MEnU
EnTERE
Adjust frequency values/positions and fine tune the settings
automatically.
✎
Not available when connecting through HDMI/DVI
cable.
screen
Coarse / Fine: Removes or reduces picture noise. If the
■
noise is not removed by Fine-tuning alone, then adjust
the frequency as best as possible (Coarse) and Fine-
tune again. After the noise has been reduced, readjust
the picture so that it is aligned to the center of screen.
Position: Adjust the PC's screen positioning if it does
■
not fit the TV screen. Press the ▲ or ▼ button to adjust
the Vertical-Position. Press the ◄ or ► button to adjust
the Horizontal-Position.
Image Reset: Resets the image to default settings.
■
Using Your TV as a Computer (PC) Display
Setting Up Your PC Software (Based on Windows XP)
Depending on the version of Windows and the video card,
the actual screens on your PC will probably look different, but
the same basic set-up information will apply in most cases.
(If not, contact your computer manufacturer or Samsung
Dealer.)
1. Click on "Control Panel" on the Windows start menu.
2. Click on "Appearance and Themes" in the "Control
Panel" window and a display dialog-box will appear.
3. Click on "Display" and a display dialog box will appear.
4. Navigate to the "Settings" tab on the display dialog-box.
The correct size setting (resolution)
y
[Optimum: 1360x768 pixels]
If a vertical-frequency option exists on your display
y
settings dialog box, the correct value is '60' or '60 Hz'.
Otherwise, just click 'OK' and exit the dialog box.
t