English; General Instructions; Safety Instructions; Use And Intended Purpose - Denios SH1 Manual De Instrucciones

English

General Instructions

No modifications or alterations can be made to the product without authorisation from the manufacturer, in the
event of this, the guarantee will be invalidated.
National standards and safety regulations must be observed.

Safety instructions

Any person working with the product is required to have familiarized him/herself with the contents of the
instructions for use.
Before the product is used, it is to be checked for correct functioning. Should any defects appear, it must not be
used!
The German regulations BGV D8 (hoisting, lifting and winching equipment and BGV B1 (handling
-
dangerous materials) are to be observed!
Do not walk under suspended loads!
-
Only use for the intended purpose!
-
The drums must not be left in a raised position.
-
The given bearing capacity of fork lift trucks and fork lift truck attachments must not be exceeded!
-
Safety instructions for ex-zone
Chemical and mechanical influences as well as the accumulation of obstructive substances can alter electrical
conductivity to such an extent that the permitted levels laid out in standards are exceeded. Dust, dirt, paint, acids,
leaches, overloading and impact loads, in particular, may impede or completely prevent electrical or electrostatic
energy from being relayed to the ground. For this reason, you must keep the device completely clean, especially
its wheels and castors, and you must not apply an extra layer of paint.
Because of the abundance of influences unknown to us in the use of our products our guarantee with respect to
the electrical conductivity relates exclusively to the compliance with the permitted values of the wheels in new
condition on delivery laid down in the standards.
The constant observation of technical safety regulations such as e.g. compliance with the values with respect to
electrical conductivity in use is exclusively in the area of responsibility of the user.
Only use DENIOS replacement parts when replacing components. Replacing with unsuitable parts will mean the
device is no longer ATEX-compatible.

Use and intended purpose

The drum gripper SH1/SH2 are forklift truck attachments for lifting and transporting 200 litre steel drums.
The maximum bearing capacity is 350 kg/700 kg.
Fassgreifer SH1 / SH2
115223 / 115225
Seite 7 von 16 Seiten Ausgabe 05/2010