Zyxel NBG410W3G Serie Guia De Inicio Rapido página 5

Look at the LEDs (Lights)
• The POWER (
ready.
• The LAN (
nections are properly made.
• The WLAN (
• The 3G OPERATION (
NAL STRENGTH ( ) light indicates the signal strength. See the User's Guide for more
information on these lights.
Check your connections if the power
turn on. If this doesn't help, disconnect the NBG41xW3G from its power
source, wait for a few seconds and then reconnect the power.
2 Access the NBG41xW3G from Your Computer
Use the NBG41xW3G's web configurator to configure settings on the NBG41xW3G.
1 Launch a web browser (such as Internet
Explorer). Enter the NBG41xW3G's
default IP address, http://192.168.1.1,
and press [ENTER].
) light blinks during start-up and stays green once the NBG41xW3G is
) and WAN (
) light turns steady green when the built-in Wi-Fi feature is enabled.
) light turns on when a 3G connection is made and the 3G SIG-
ENGLISH
) lights turn on and stay on if the corresponding con-
or LAN
( )
2 Click Login (the default password 1234
is already entered).
5
light does not
( )