Desa POWERFAST PEBNS11/4-B Manual De Instrucciones página 6

Note: We recommend that you only use PowerFast
in this tool. Wrong staples/nails can cause jamming.
5. Slide magazine closed. Make sure magazine locks into place.
Operating Tool
WARNING: Keep power switch in the OFF (0) position and finger
off trigger until ready to drive staple/nail.
WARNING: Keep all body parts away from staple/nail exit on
tool.
1. Make sure power switch is in the OFF (0) position.
2. Plug tool into a 120 Volt/60 Hertz outlet.
3. Grip tool firmly.
4. Toggle power switch to the ON (I) position.
5. Press tool firmly against work surface. Use enough pressure to depress
safety lock located on staple/nail exit of tool (see Figure 5).
IMPORTANT: The safety lock
must be depressed for this tool
to operate. This tool will not
fire unless this is depressed
completely.
6. Squeeze trigger to fire.
7. IMPORTANT: Do not fire this
tool when empty of staples/
nails. This may damage tool.
Note: In difficult fastening jobs, press
down on head of tool with palm of
free hand (see Figure 5). This will
improve staple/nail driving.
www.desatech.com
Figure 4
Safety Lock
6
heavy-duty staples/nails
®
Figure 5
116261