Health Hazard By Dust; Technical Data; Intended Use; Parts Of The Machine - Festool TID 18 Manual De Instrucciones

English
3.3

Health hazard by dust

WARNING! various dust created by pow­
er sanding, sawing, grinding, drilling and
other construction activities contains chemicals
known (to the State of California) to cause can­
cer, birth defects or other reproductive harm.
Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement
and other masonry products, and
• arsenic and chromium from chemically
treated lumber.
The risk from these exposures varies, depend­
ing on how often you do this type of work. To re­
duce your exposure to these chemicals: work in
a well ventilated area, and work with approved
safety equipment, such as dust masks that are
specially designed to filter out microscopic par­
ticles. Wash hands after handling.
WARNING
TO REDUCE THE RISK OF INJURY, USER
MUST READ INSTRUCTION MANUAL.
4

Intended use

This cordless impact screwdriver is intended
for driving in and tightening screws up to the
specified maximum dimensions in metal, wood,
plastics and similar materials.
Self-tapping drill screws are intended for use in
metal.
It must be noted that speed is directly connect­
ed to torque. This means: The lower the speed,
the lower the torque.
This power tool is intended for use with
BP Festool battery packs of the same voltage
class.
The user is liable for damage and acci­
dents caused by improper and non-in­
tended use; this also includes damage and
wear caused by continuous industrial operation.
6
5

Technical data

Cordless impact screwdriver
Motor voltage
Number of gears
No‑load speed*
Max. torque
Reaction torque on the han­
dle
Tool holder DIN 3126 E
Tool holder dimension A [2]
Max. screw size for softwood 5/16 x 8-10/16"
Weight (incl. battery pack
BP 18 Li 6,2 AS) as per EPTA
procedure 01:2014
* Speed values based on fully charged battery
pack.
Battery pack
Battery voltage
6

Parts of the machine

[1-1]
Buttons for releasing the battery pack
[1-2] Capacity display button on battery
pack
[1-3]
Capacity display
[1-4] LED lamp
[1-5] Electronic speed selection
[1-6] On/off switch
[1-7] Locking sleeve
[1-8]
Rotational direction switch and safety
lock/transport lock
[1-9] Bit store
[1-10] Belt clip
[1-11] Insulated gripping surfaces (grey
shaded area)
TID 18
3 + T-mode
1st gear
1200 min
2nd gear
2000 min
3rd gear
3200 min
180 Nm
10 Nm
1/4" (6.3 mm)
3/8" (9.5 mm)
(8 x 220 mm)
3.7 lbs (1.7 kg)
BP 18
A
18 V
-1
-1
-1
18 V
2