Malfunctions And Troubleshooting; Disposal; Technical Data - Hurricane DT5307 Manual De Instrucciones

GB
NOTICE! Risk of machine damage!
Do not store the machine in damp areas
without protection.
- Store the machine where it is dry and well
ventilated.
Transport
- If shipping, use the original packaging
wherever possible.

Malfunctions and troubleshooting

In the event of a malfunction...
DANGER! Danger of injury!
Improperly conducted repairs may prevent
your machine from working safely. Such
repairs will endanger you and your
surroundings.
Malfunctions are often caused by minor faults.
You can easily remedy most of these yourself.
Please consult the following table before
contacting the vendor. You will save yourself a lot
of trouble and possibly money too.
Fault/malfunction
Motor does not run.
Chattering noise.
Whistling noise.
Insufficient performance.
If you can't fix the fault yourself, contact your
nearest vendor. Please be aware that any
improper repairs will also invalidate the warranty
and additional costs may be incurred.

Disposal

Disposal of the appliance
Appliances which are labelled with the adjacent
symbol must not be disposed of in household
waste. You must dispose of such
old electrical and electronic
equipment separately.
– Please check with your local
authority about the possibilities for
correct disposal.
Disposal of the packaging
The packaging consists of cardboard and
correspondingly marked plastics that
can be recycled.
– Make these materials available for
recycling.
Cause
No mains voltage?
Connection cable defective?
Foreign body in the working
roller?
Drive belt slipping?
Grass too long?
Drive belts defective?
Is the working roller worn?
22
Technische Daten
Item number
Rated voltage
Rated power
Protection class
Grade of protection
Idling speed
Working width
Working height
Number of steps
Volume of cutting bag
Acoustic power (LWA)*
Acoustic pressure (LPA)*
Vibration**
Weight
Remedy
Check cables, plug, socket and fuse.
Contact your local vendor.
Switch the machine off, remove the
foreign body.
Contact your local vendor.
Mow the grass before de-thatching.
Contact your local vendor.
Adjusting the working depth
*) The specified values are emission values and do not
necessarily represent safe workplace values. Although there
is a correlation between emission and immission levels, this
cannot be used to infer whether additional safety measures are
necessary or not. Factors which affect the current immission
levels at the workplace, include the type of room, other sources
of noise, e. g. the number of machines operating and other
processes taking place in the vicinity. Permitted workplace
values can differ from country to country. This information is
designed to help the user to better assess the dangers and risks.
Determination of noise emission values in accordance with EN
60745-1.
**) The specified vibration emission value was measured in
accordance with a normed test procedure and can be used in
order to compare one tool with another. The specified vibration
emission value can also be used for an introductory evaluation
of the exposure. The vibration emission value may fluctuate from
the specified value during actual use of the power tool. These
fluctuations will depend on the way in which the power tool
is used. Try to keep vibrations to a minimum. One method of
27730254
220-240 V~, 50 Hz
1400 W
II
IPX4
5000 min
-1
320 mm
−10, -5, 0, 5 mm
4
40 l
103 dB(A)
82.7 dB(A) (K = 3 dB(A))
< 4.5 m/s² (K = 1,5 m/s²)
11.8 kg