After-Sales Service And Application Service - Bosch PFS 5000E Manual Original

OBJ_BUCH-2026-005.book Page 25 Tuesday, May 24, 2016 1:38 PM
Problem
Spray jet pulsates
Spray material dripping at the
nozzle cap
No spray material coming out of
the nozzle cap
Tool will not spray

After-sales Service and Application Service

Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can al-
so be found under:
www.bosch-pt.com
Bosch's application service team will gladly answer questions
concerning our products and their accessories.
In all correspondence and spare parts orders, please always
include the 10-digit article number given on the nameplate of
the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
Bosch Power Tools
Cause
Not enough spray material in container
Suction tube 17 loose
Container seal 16 not positioned or not cor-
rectly positioned in groove of suction tube 17
Nozzle cap 10/11/12 loose
Deposit of spray material on the nozzle cap
10/11, the nozzle needle 15 and the air cap 2
Nozzle loose
Base unit is switched off
No pressure build-up in container 7 because
container not completely closed
Suction tube 17 loose
Nozzle cap 10/11/12 clogged
Suction tube 17 clogged
Ventilation hole 18 on suction tube 17
clogged
Container seal 16 missing or damaged
Spray material too viscous
Spray material dirty (lumps of paint)
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
www.bosch.com.au
Republic of South Africa
Customer service
Hotline: (011) 6519600
English | 25
Corrective Measure
Refill spray material
Slide the suction tube all the way onto the paint
channel 19
Mount the container seal 16 precisely all
around in the suction tube groove
Tighten the nozzle cap 10/11/12
Clean the nozzle cap, nozzle needle and air cap
Tighten the nozzle cap 10/11/12
Press the on/off button 25
Turn the container 7 towards the close
symbol until you hear the lock ring 6 en-
gage
Slide the suction tube all the way onto the paint
channel 19
Clean the nozzle cap
Clean suction tube
Clean the suction tube and the ventilation hole
Slide a (new) container seal over the suction
tube into the groove
Dilute the spray material again and carry out a
test-spray run
Completely empty and clean the spray gun;
pour the spray material through the filling
sieve when filling
1 609 92A 1KX | (24.5.16)