Control Panel Lock; Boost Function; Switching Off The Hob; Safety Devices - SCHOLTES MULTIPLO.1 F Manual De Instrucciones

1. Press the programming button
GB
indicator light turns on.
2. Set the desired duration using buttons
3. Confirm by pressing button
The timer begins counting down immediately. When
the time has elapsed, a buzzer will sound (for 10
seconds).

Control panel lock

When the hob is switched on, the oven controls may
be locked in order to prevent the settings from being
changed accidentally. To activate the function,
press and hold button
will be locked and the indicator light above the
button will switch on.
To use any of the controls (e.g. to stop cooking),
you must switch off this function. Press the
button for a few moments, the indicator light will
switch off and the lock function will be removed.

BOOST function

The extreme flexibility and versatility of the Multiplo
means it is possible to cook any type of dish
quickly, without compromising its quality.
The "Boost" function in particular speeds up cooking
times for dishes such as pasta or any fried food,
reducing the overall time required by approximately
50% in comparison with the time required when
using a cooking recipient with a single cooking zone
(horizontal position).
To bring the water to the boil or to fry food
quickly , simply switch on the hob, placing the
single cooking recipient centrally and in a vertical
position with respect to the text "boost" (see figure) .
16
until the timer
and .
.
for 2 seconds; the controls
Press button to
select the single
cooking zone then
press buttons
and to select the
maximum power level
"16".
The vertical position of
the cooking recipient may be maintained until the
cooking process is complete.
Alternatively, once the correct boiling/frying
temperature has been reached and the hotplate
switched off using the relevant buttons, the cooking
recipient may be rotated by 90°, returning it to a
horizontal position on the front cooking zone and
keeping the temperature constant (see figure). The
free cooking zone may be used to start another
cooking process by pressing selector button
select the desired power level by pressing buttons
and .

Switching off the hob

If the button is pressed, the appliance switches
off. If the appliance controls have been locked, they
will continue to be locked even after the hob has
been switched back on. In order to switch the hob
on again, you must remove the lock function.

Safety devices

Pan sensor
Each cooking zone is equipped with a cooking
recipient sensor device. The hotplate only emits heat
when a cooking recipient is placed on it. If, once the
appliance has been switched on and the cooking
zone and corresponding power level selected, the
numerical indicator flashes, this means that the
cooking recipient should be placed in the
corresponding position.
Heat indicators
If, after the appliance has been used, the letter "H"
remains lit on the corresponding display, this means
that the heating zone is still hot (temperature over
60°C); do not touch it. This indication will disappear
once the hotplate has cooled down.
Buzzer
This can also indicate several irregularities:
• Something has been spilt on the control panel.
• A button has been pressed for too long. All of the
above situations may cause the buzzer to sound.
;