Canon imageRUNNER C5025 Guía De Operación Rápida página 4

Quick Setup
Configuring the Machine
Configuring the Initial Settings of
the Machine
1.
2.
Follow the instructions on the screen to
perform the following:
• Set the language
• Set the country and region
• Set the time zone
En
• Set the date and time
• Set the Remote UI Access PIN
• Perform color correction
IMPORTANT
Setting the Remote UI Access PIN is
recommended to reduce the risk of
unauthorized access by outside third parties.
4
Configure the settings in the following order.
Configuring the Method of
Connecting to a Computer
Before starting the configuration
• The machine cannot be connected to
both wired and wireless LANs at the
same time.
• If the machine is connected to an
unsecured network, your personal
information might be leaked to a third
party. Please be aware and careful of this.
• The machine does not come with a
router. Please have one ready, if necessary.
• Even in an environment without wireless
LAN router, you can use Access Point
Mode to make a wireless connection to
the machine directly from your mobile
device (Direct Connection).
User's Guide
Specifying the connection method
• To connect via wireless LAN : <Yes>
• To connect via wired LAN or USB : <No>
To connect via wireless LAN
1.
Make sure that the computer is connected to a
router properly.