Guides For Malfunction - SPORTSTECH F28 Manual De Instrucciones

12、Guides for Malfunction
Analyzing and eliminating malfunction
Item. Malfunction
The machine
1
doesn't work
The meter
2
doesn't work
E01
3
on the scr een
E02
4
on the screen
E03
5
on the screen
E04
6
on the screen
E06
7
on the screen
E07
8
on the screen
E09
9
on the screen
E0C
10
on the screen
Reason
The safety key is missing
The power switch is in "0"
position
The meter and upper
communication line are not
correctly connected
The upper communication line is
broken
No signal
Voltage overload protection
Current overload protection
Open circuit of motor
Communication failed
No safety key
Error of incline
Short-circuit protection
- 17 -
Solution
Put the safety key at the right position
Turn power switch to "1"
Disassemble the meter and make sure that the
meter and communication line are well
connected.
Replace the upper communication line!
If there is no signal from speed sensor wire for 5-
8 seconds, check connections first, then replace
sensor wire if broken
If there is no signal from the motor for 5-8
seconds, check connections first, then replace the
motor if broken
Check input voltage.
Check the motor. If it's good, restart the machine.
If there is something broken in control panel or
the motor, replace control panel or the motor.
Check connections of motor and motor, if
broken, replace the motor.
Check sensor wire to see whether it is well
connected or whether it is broken.
If safety key is at the right position, then check
the connecting part and make sure the safety key
is connected well.
Check whether the VR wire of incline motor is
well connected. Then check other connections of
incline motor. If there are lines broken, replace
them.
Check PCB and motor, if broken, replace PCB or
motor.