Descargar Imprimir esta página

Chicco up to 5 Manual De Instrucciones página 12

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 26
broken or unstable chairs, folding
chairs, rocking chairs or chairs with
armrests.
• Do not use the chair booster seat
with more than one child at a time.
• Before fastening the booster seat
to the chair, always check that the
floor and chair seat are perfectly
horizontal; never install the product
on chairs which are positioned on a
sloping surface.
• Do not let other children play unat-
tended near the chair booster seat.
• Opening, adjusting and closing op-
erations of the booster seat must
be carried out exclusively by an
adult.
• When opening, adjusting or clos-
ing the booster seat, make sure
that your child is at a safe distance.
• During adjusting operations, make
sure the moving parts of the boost-
er seat do not come into contact
with the child's body.
• Do not open and close the booster
seat when the child is sitting on it.
• Do not install the product on high-
chairs.
• Do not use the product to trans-
port the child in the car.
• It is dangerous to use this product
on an elevated surface.
• Do not leave on chair booster seat
small objects that can be swal-
lowed by children.
• Do not use the chair booster seat
in proximity of curtain cords, win-
dows or heat sources.
• Never use the product as a swim-
ming aid or floating chair in a
swimming pool.
• Do not use the chair booster seat
positioned directly on the floor.
• Do not use the chair booster seat
without seat and/or backrest pad-
ding.
• Prolonged exposure to direct sun-
light can cause the colours of the
fabric to fade.
• After a prolonged exposure of the
product to high temperatures, wait
a few minutes prior to place your
child in it.
• When not in use, the chair booster
seat must be kept out of the reach
of children.
INSTALLATION AND USE 6-36 m
When opening the package, the chair boster seat will
be completely compact, with the straps fixed in the corre-
sponding buckles. For the installation, after having pressed
the release button of the lower straps (U), perform the fol-
lowing operations:
1. Release the lower and rear straps (I) and (M) (fig. 2);
2. Release the activity tray (F) from the chair booster seat
pulling outwards on the armrests (C) (fig. 3);
3. Lift the backrest (A) (fig. 4), keeping the button (D)
pressed, and lock it in vertical position until hearing a "Click"
to confirm the engagement (fig. 4). Ensure the correct en-
gagement of the backrest making sure that the backrest
release button (D) is completely removed from its seat.
4. The booster seat can be adjusted to 3 different heights.
WARNING: The height adjustment must be carried out
without the child seated in the chair booster seat.
At the same time press the two height adjustment buttons
(K) located under the armrests (C) and extract the legs (J)
until selecting the desired height (fig. 5).
Once the height is selected, release the two buttons and
make sure that the legs (J) are locked at the same height.
WARNING: To prevent compromising the chair booster
seat stability, the legs must be adjusted at the same height.
To lower the height, keep the buttons (K) pressed and push
the structure downward in order to slide the legs (J) inside
the structure (fig. 6) until reaching the desired position.
5. Place the seat on the adult chair (fig. 7); to use this prod-
uct, the adult chair should have the minimum sizes required
and indicated in figure 8. Attach the rear fastening straps
(M) by passing them behind the adult chair's backrest and
the lower fastening straps (I) around the seat (fig. 9), making
sure to hear a "Click" to confirm the correct engagement.
To tightly fix the seat to the adult chair press the retractable
straps lock button (O), placed in front of the seat centre (fig.
10) to lock the sliding of the fastening straps.
WARNING: Then the free ends of the straps (M) and (I)
must be pulled to adjust the length so they are well pulled
and that the seat is well fastened to the adult chair (fig. 11).
WARNING: Make sure that the anti-slip feet (L) are well fit-
ted to the seat surface of the adult seat.
WARNING: Always check that the fastening straps are not
twisted.
6. Once the seat is fitted to the chair and to the backrest
of the adult chair, the child can be seated carrying out the
12
fol
a.
(fig
b.
the
le
be
7.
ou
tra
lise
sta
ce
to
ad
 
FO
Ta
the
8.
ha
9.
the
str
10
the
mi
11
bu
bo
12
(A)
tio
13
de
14
str
ble
tha
To
 
RE
Fo
is p
To
15
the
fra
16
in
res
17
the
rem
18
thr
sh
 

Publicidad

loading