chair supporting the chair booster
seat.
• Do not use the chair mounted seat
if any part is broken, torn or miss-
ing.
• Do not use accessories or replace-
ment parts other than those ap-
proved by the manufacturer.
• Never use the chair booster seat on
broken or unstable chairs, folding
chairs, rocking chairs or chairs with
armrests.
• Do not use the chair booster seat
for more than one child at a time.
• Before fastening the chair booster
seat to the chair, always check that
the floor and chair seat are perfectly
horizontal; never install the prod-
uct on chairs which are positioned
on a sloping surface.
• Do not let other children play unat-
tended near the chair booster seat.
• Opening, adjusting and closing op-
erations of the booster seat must
be carried out exclusively by an
adult.
• When opening, adjusting or clos-
ing the booster seat, make sure
that your child is at a safe distance.
• During adjusting operations, make
sure the moving parts of the boost-
er seat do not come into contact
with the child's body.
• Do not open and close the booster
seat when the child is sitting on it.
• Do not install the product on high-
chairs.
• Do not use the product to trans-
port the child in the car.
• It is dangerous to use this product
on an elevated surface.
• Do not leave on chair booster seat
small objects that can be swal-
lowed by children.
• Do not use the chair booster seat
in proximity of curtain cords, win-
dows or heat sources..
• Never use the product as a swim-
ming aid or floating chair in a swim-
ming pool.
• Do not use the chair booster seat
positioned directly on the floor.
• Prolonged exposure to direct sun-
light can cause the colours of the
fabric to fade.
• Do not use the chair booster seat
without seat and/or backrest pad-
ding.
• After a prolonged exposure of the
product to high temperatures, wait
a few minutes before placing your
child in it.
• When not in use, the chair booster
seat must be kept out of the reach
of children.
INSTALLATION AND USE 36-60 m:
WARNING: To use the chair booster seat in this configu-
ration and ensure the child's safety, the legs (J) shall not
be extracted, the chair mounted seat must be completely
lowered.
To use it in this configuration, follow the following steps:
19. Remove the activity tray as indicated in point 2.
20. Remove the backrest (A) pressing the button (D) on the
back, and turn the backrest towards the front part of the
chair, paying attention to keep the button pressed (D). At
this point, when the backrest is in horizontal position it is
possible to remove it by extracting the insert (S) from the
corresponding housing (T) (fig. 25). Now the button (D) can
be released.
WARNING: When not in use, keep the backrest and the
activity tray out of the reach of the child.
21. In this configuration, after having removed the seat pad-
ding (R), as indicated in points 15, the safety harness (waste-
line strap) of the child (E) must be placed back in the corre-
sponding compartments (Z) on the seat frame (fig. 26-27).
22. Fix the padding again (R) to the frame, ensuring to also
have properly inserted the crotch strap in the housing
compartment (fig. 26).
23. To attach the chair to the seat follow the steps indicated
in point 5 (fig. 28-29).
WARNING: Then the free ends of the straps (M) and (I)
must be pulled to adjust the length so they are well pulled
and that the seat is well fastened to the chair.
WARNING: Make sure that the anti-slip feet (L) are well fit-
ted to the seat surface of the seat.
WARNING: For a correct and safe functioning of the fasten-
ing straps, make sure that they are not twisted.
14
FO
WA
ma
Wa
se
24
rem
25
bu
bo
26
str
ble
tha
To
WA
Th
no
for
of
ev
ple
ca